Solution precursor plasma spray process: A promising route for the fabrication of Mn-Co oxide based protective coating for SOFC
IR@NAL: CSIR-National Aerospace Laboratories, Bangalore
View Archive Info| Field | Value | |
| Title |
Solution precursor plasma spray process: A promising route for the fabrication of Mn-Co oxide based protective coating for SOFC
|
|
| Creator |
Senthil Kumar, S
Nalluri, A Balaji, N Shri Prakash , B Ojha, PK Aruna, ST |
|
| Subject |
Aeronautics (General)
|
|
| Description |
A spinel-based manganese cobaltite (Mn 1.5 Co 1.5 O 4 ) surface protective layer which is suitable for SOFC current
collectors and bi-polar interconnector plates is developed by solution precursor plasma spraying (SPPS)
technique on SS430 flat substrates and meshes. The plasma spray parameters are optimized for getting adherent
coatings on SS substrates and meshes. The area specific resistance (ASR) of as sprayed and heat treated (800 °C
for 72 h) coatings is studied using DC four-probe technique. The diffusion barrier properties of the spinel coating
after oxidation studies are analyzed by scanning electron microscopy and energy dispersive X-ray spectroscopy
to analyze the chromium diffusion across the coating and at the substrate-coating interface. Significant improve-
ment in oxidation resistance is observed for the spinel coated substrates compared to bare SS430 substrate and Cr
diffusion is not observed across the coating. The current collector mesh with protective coating exhibits a stable
ASR. The coated current collector mesh has been used in a SOFC button cell and tested. The cell performance is not
affected by the use of spinel coated SS430 mesh. This study shows that SPPS is a viable approach for fabricating
protective layers as the process is simpler than suspension plasma spraying, economically attractive and can be
used for coating larger areas in comparison to sputtering process.
|
|
| Publisher |
Elsevier Publisher
|
|
| Date |
2017
|
|
| Type |
Journal Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://nal-ir.nal.res.in/12549/1/SCT%2DSPPS.pdf
Senthil Kumar, S and Nalluri, A and Balaji, N and Shri Prakash , B and Ojha, PK and Aruna, ST (2017) Solution precursor plasma spray process: A promising route for the fabrication of Mn-Co oxide based protective coating for SOFC. Surface and Coatings Technology, 324 . pp. 26-35. ISSN 0257-8972 |
|
| Relation |
http://dx.doi.org/10.1016/j.surfcoat.2017.05.052
http://nal-ir.nal.res.in/12549/ |
|