CSIR Central

Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling

IR@CMERI: CSIR- Central Mechanical Engineering Research Institute (CMERI), Durgapur


Field	Value

Title	Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling

Creator	Dikshit, Mithilesh K. Puri, Asit B. Maity, Atanu

Description	In high-speed ball end milling, cutting forces influence machinability, dimensional accuracy, tool deflection, tool failure, machine tool chatter and vibration, etc. Thus, an accurate prediction of cutting forces prior to actual machining is very much essential for a good insight into the process to produce good quality machined parts. In ball end milling, the cutting forces are proportional to the chip cross-sectional area and constant of proportionalities are referred as cutting force coefficients and they depend on many factors, like cutter geometry, cutting conditions, tool material and workpiece material properties. However, determining these specific cutting force coefficients in ball end milling process is not at all straightforward; rather it is fairly complex. Machining with higher cutting speed affects the chip formation mechanisms and finally causes a significant change in the cutting force coefficients. In the present study, the effect of rotational speeds has been investigated on the cutting force coefficients. A series of experiments have been performed at higher rotational speed. It has been found that the cutting force coefficients are influenced by rotational speed significantly. The results are also verified using experiments.

Publisher	Springer

Date	2017-09

Type	Article PeerReviewed

Identifier	Dikshit, Mithilesh K. and Puri, Asit B. and Maity, Atanu (2017) Analysis of rotational speed variations on cutting force coefficients in high-speed ball end milling. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (9). pp. 3529-3539.

Relation	http://cmeri.csircentral.net/450/