CSIR Central

Long Period Fiber Grating Near Turn Around Point: Suitable Design for Bio-Sensing

IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata


Field	Value

Title	Long Period Fiber Grating Near Turn Around Point: Suitable Design for Bio-Sensing

Creator	Dey, Tanoy Kumar Biswas, Palas Basumallick, Nandini Bandyopadhyay, Somnath

Subject	Processing Science

Description	We report our experimental study on the add-layer sensitivity of LP0,11 cladding mode (CM) of Long Period Fiber Grating (LPFG) near turn around point (TAP). The CM response was tuned by controlled modification of the cladding diameter and deposition of overlay layers of polymer material. In this process an add-layer sensitivity of 2.308 nm(WL)/nm(TH) has been achieved. It is interesting to observe that add-layer sensitivity obtained in this process is close to the sensitivity of the same CM operated nearthe mode transition (MT). The advantage is that, the sensor designed as per the proposed methodology will not be plagued by the basic limitations of operating a CM near MT, i.e. loss of contrast of the resonant band and limited dynamic range. In our experiment, the dynamic range has found to be similar to 100 nm where the contrast remains greater than -10 dB throughout the range of measurement which is practically impossible to get for any CM operating at MT. The experimental result was supported by theoretical calculations. Also the SRI sensitivity of the sensor was found out to be 6400 nm/SRIU.

Publisher	IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC

Date	2021-09

Type	Article PeerReviewed

Format	application/pdf

Identifier	http://cgcri.csircentral.net/5302/1/somnath.pdf Dey, Tanoy Kumar and Biswas, Palas and Basumallick, Nandini and Bandyopadhyay, Somnath (2021) Long Period Fiber Grating Near Turn Around Point: Suitable Design for Bio-Sensing. IEEE Sensors Journal, 21 (17). pp. 18800-18805. ISSN 1530-437X

Relation	http://cgcri.csircentral.net/5302/