Failure analysis of collector mesh of a helicopter
IR@NAL: CSIR-National Aerospace Laboratories, Bangalore
View Archive InfoField | Value | |
Title |
Failure analysis of collector mesh of a helicopter
|
|
Creator |
Suresh Kumar, M
Madan, M Venkataswamy, MA Sujata, M Parameswara, MA Bhaumik, SK |
|
Subject |
Aeronautics (General)
Chemistry and Materials (General) |
|
Description |
The gear/pinion of the collector mesh has failed by spalling/destructive pitting/wear. Evidences suggest that the failure was due to excessive load on the working flank of the gear/pinion teeth. Analysis shows that inadequate tip relief of gear/pinion teeth would have aggravated the situation further. The material of construction, microstructure, and case and core hardness of the gear/pinion were found to conform to specification. No metallurgical abnormalities were responsible for the failure. It may be noted that a similar failure was investigated earlier in this laboratory (refer NAL Report No. MT-FA-917-05-2005).
|
|
Publisher |
National Aerospace Laboratories
|
|
Date |
2005
|
|
Type |
Proj.Doc/Technical Report
NonPeerReviewed |
|
Identifier |
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of collector mesh of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.
|
|
Relation |
http://nal-ir.nal.res.in/9996/
|
|