CSIR Central

Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium

IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata

View Archive Info
 
 
Field Value
 
Title Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium
 
Creator Das, Mitun
Bysakh, Sandip
Basu, Debabrata
Kumar, T. S. Sampath
Balla, Vamsi Krishna
Bose, Susmita
Bandyopadhyay, Amit
 
Subject Microstructure and Characterization
 
Description Laser processing of Ti-SiC composite coating on titanium was carried out to improve wear resistance using Laser Engineered Net Shaping (LENS (TM)) - a commercial rapid prototyping technology. During the coating process a Nd:YAG laser was used to create small liquid metal pool on the surface of Ti substrate in to which SiC powder was injected to create Ti-SiC metal matrix composite layer. The composite layers were characterized using X-ray diffraction, scanning and transmission electron microscopy equipped with fine probe chemical analysis. Laser parameters were found to have strong influence on the dissolution of SiC, leading to the formation of TiSi(2), Ti(5)Si(3) and TiC with a large amount of SiC on the surface. Detailed matrix microstructural analysis showed the formation of non-stoichiometric compounds and TiSi(2) in the matrix due to non-equilibrium rapid solidification during laser processing. The average Young's modulus of the composite coatings was found to be in the range of 602 and 757 GPa. Under dry sliding conditions, a considerable increase in wear resistance was observed, i.e., 5.91 x 10(-4) mm(3)/Nm for the SiC reinforced coatings and 1.3 x 10(-3) mm(3)/Nm for the Ti substrate at identical test conditions. (C) 2011 Elsevier B.V. All rights reserved.
 
Publisher Elsevier
 
Date 2011-06
 
Type Article
PeerReviewed
 
Format application/pdf
 
Identifier http://cgcri.csircentral.net/88/1/Surf_CoatTech_205_(2011)_4366%E2%80%934373.pdf
Das, Mitun and Bysakh, Sandip and Basu, Debabrata and Kumar, T. S. Sampath and Balla, Vamsi Krishna and Bose, Susmita and Bandyopadhyay, Amit (2011) Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium. Surface & Coatings Technology , 205 (19). pp. 4366-4373. ISSN 0257-8972
 
Relation http://cgcri.csircentral.net/88/