CSIR Central

CTAB-assisted sol–gel synthesis of Li4Ti5O12 and its performance as anode material for Li-ion batteries

IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi

View Archive Info
 
 
Field Value
 
Title CTAB-assisted sol–gel synthesis of Li4Ti5O12 and its performance as anode material for Li-ion batteries
 
Creator Khomane, R.B.
Prakash, A.S.
Ramesha, K.
Sathiya, M.
 
Subject Lithium batteries
Electrochemical Materials Science
Electrochemical Power Sources
 
Description A simple CTAB-assisted sol–gel technique for synthesizing nano-sized Li4Ti5O12 with promising electrochemical performance as anode material for lithium ion battery is reported. The structural and morphological properties are investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The electrochemical performance of both samples (with and without CTAB) calcined at 800 8C is evaluated using SwagelokTM cells by galvanostatic charge/discharge cycling at roomtemperature. The XRD pattern for sample prepared in presence of CTAB and calcined at 800 8C shows high-purity cubicspinel Li4Ti5O12 phase (JCPDS # 26-1198). Nanosized-Li4Ti5O12 calcined at 800 8C in presence of CTAB exhibits promising cycling performance with initial discharge capacity of 174 mAh g-1 (100% of theoretical capacity) and sustains a capacity value of 164 mAh g-1 beyond 30 cycles. By contrast, the sample prepared in absence of CTAB under identical reaction conditions exhibits initial discharge capacity of 140 mAh g-1 (80% of theoretical capacity) that fades to 110 mAh g-1 after 30 cycles
 
Publisher Elsevier
 
Date 2011
 
Type Article
PeerReviewed
 
Format application/pdf
 
Identifier http://cecri.csircentral.net/2918/1/124-2011.pdf
Khomane, R.B. and Prakash, A.S. and Ramesha, K. and Sathiya, M. (2011) CTAB-assisted sol–gel synthesis of Li4Ti5O12 and its performance as anode material for Li-ion batteries. Materials Research Bulletin, 46 (07). pp. 1139-1142. ISSN 0025-5408
 
Relation http://cecri.csircentral.net/2918/