1:4.405 scale LCA High speed air-intake model: Revised analysis and design
IR@NAL: CSIR-National Aerospace Laboratories, Bangalore
View Archive Info| Field | Value | |
| Title |
1:4.405 scale LCA High speed air-intake model: Revised
analysis and design
|
|
| Creator |
Sridhara Murthy, S
Venkatasubramanyam, DV Ningaiah, K Subramanya, HY Subramanya Sastry, SS Kamath, Ashok |
|
| Subject |
Structural Mechanics
|
|
| Description |
As a follow up of the recommendations of the design review
committee a few modifications were made in the structural design of the LCA wing. The important among them being the addition of three more bolts on the rear side of the port wing to strengthen, the wing attachments. Steel leading edge proposed in the original design was replaced by an aluminium alloy leading edge. A revised finite element analysis of the wing establishes that in general the stress levels are low over a large portion of the wing. The
stress values in the wing bolts show that the bolts have adequate factor of safety. The splitter plate analysis results point to the adequate strength of them, and the natural frequency spectrum, shows that the fundamental frequency of the old model is much above the buzz frequency. The latter observation leads to they conclusion that the buzz noticed in the model is not due to any resonance phenomenon.
|
|
| Publisher |
National Aerospace Laboratories
|
|
| Date |
1990-06
|
|
| Type |
Proj.Doc/Technical Report
NonPeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://nal-ir.nal.res.in/11338/1/PD_ST_9024.pdf
Sridhara Murthy, S and Venkatasubramanyam, DV and Ningaiah, K and Subramanya, HY and Subramanya Sastry, SS and Kamath, Ashok (1990) 1:4.405 scale LCA High speed air-intake model: Revised analysis and design. Project Report. National Aerospace Laboratories, Bangalore. |
|
| Relation |
http://nal-ir.nal.res.in/11338/
|
|