A comparative approach for the characterization of a pneumatic piston gauge up to 8 MPa using finite element calculations
IR@NPL: CSIR-National Physical Laboratory, New Delhi
View Archive InfoField | Value | |
Title |
A comparative approach for the characterization of a pneumatic piston gauge up to 8 MPa using finite element calculations
|
|
Creator |
Dogra, Sugandha
Singh, Jasveer Lodh, Abhishek Sharma, Nita Dilawar Bandyopadhyay, A. K. |
|
Subject |
Engineering
Instruments/ Instrumentation |
|
Description |
This paper reports the behavior of a well-characterized pneumatic piston gauge in the pressure range up to 8 MPa through simulation using finite element method (FEM). Experimentally, the effective area of this piston gauge has been estimated by cross-floating to obtain A0 and λ. The
FEM technique addresses this problem through simulation and optimization with standard commercial software (ANSYS) where the material properties of the piston and cylinder,
dimensional measurements, etc are used as the input parameters. The simulation provides the effective area Ap as a function of pressure in the free deformation mode. From these data, one can estimate Ap versus pressure and thereby Ao and λ. Further, we have carried out a similar theoretical calculation of Ap using the conventional method involving the Dadson’s as well as Johnson–Newhall equations. A comparison of these results with the experimental results has been carried out.
|
|
Publisher |
IOP Publishing Ltd
|
|
Date |
2010-11-12
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://npl.csircentral.net/772/1/1.pdf
Dogra, Sugandha and Singh, Jasveer and Lodh, Abhishek and Sharma, Nita Dilawar and Bandyopadhyay, A. K. (2010) A comparative approach for the characterization of a pneumatic piston gauge up to 8 MPa using finite element calculations. Measurement Science and Technology, 22 (2). 025103. ISSN 0957-0233 |
|
Relation |
http://dx.doi.org/10.1088/0957-0233/22/2/025103
http://npl.csircentral.net/772/ |
|