MECHANICAL BEHAVIOUR OF SINTERED 6061 ALUMINIUM ALLOY AND ITS COMPOSITES CONTAINING SOFT OR HARD PARTICLES.
IR@AMPRI: CSIR-Advanced Materials and Processes Research Institute, Bhopal
View Archive Info| Field | Value | |
| Title |
MECHANICAL BEHAVIOUR OF SINTERED 6061 ALUMINIUM ALLOY AND ITS COMPOSITES CONTAINING SOFT OR HARD PARTICLES.
|
|
| Creator |
Dr., A K Jha
Dr., S. V. Prasad Dr., G. S. Upadhya |
|
| Subject |
Material/Component Development, Processing and Characterization
|
|
| Description |
PREPARED BY THE CONVENTIONAL POWDER METALLURGY (P/M) ROUTE WERE THE 6061 ALUMINUM ALLOY AND ITS PARTICULATE COMPOSITES CONTAINING UP TO 14 VOL.% OF GRAPHITE, TALC, ALUMINA, AND TIC DISPERSOIDS; PROPERTIES LIKE YIELD STRESS, HARDNESS, POROSITY, ULTIMATE TENSILE STRENGTH, AND ELONGATION WERE EVALUATED; USING SCANNING ELECTRON MICROSCOPY, FRACTOGRAPHS WERE OBSERVED; THE COMPOSITES CONTAINING TIC SHOWED IMPROVEMENT IN PROPERTIES OVER THAT OF THE BASE ALLOY, WHEREAS THOSE CONTAINING GRAPHITE SHOWED MINIMUM MECHANICAL PROPERTIES AMONGST ALL TYPES OF COMPOSITES; THE MECHANICAL BEHAVIOR OF THE COMPOSITES IS EXPLAINED ON THE BASIS OF INTRINSIC PROPERTIES OF DISPERSOIDS AND SINTERING CHARACTERISTICS OF THE COMPOSITE. TERMS: M--(U), INDIA, ENGLISH, AA 6061, ELONGATION, ENERGY DISPERSIVE ANALYSIS, FRACTOGRAPHY, FRACTURE SURFACE, PRECIPITATION HARDENING, RESIDUAL STRESS, SEM, TENSILE PROPERTIES, TENSILE YIELD STRENGTH, ULTIMATE TENSILE STRENGTH, X-RAY ANALYSIS, HEAT TREATMENT, SINTERING, SOLUTION HEAT TREATMENT, WATER QUENCHING, ALUMINUM ALLOYS, MECHANICAL PROPERTIES, EXPERIMENTAL.
|
|
| Date |
1990
|
|
| Type |
Article
PeerReviewed |
|
| Identifier |
Dr., A K Jha and Dr., S. V. Prasad and Dr., G. S. Upadhya (1990) MECHANICAL BEHAVIOUR OF SINTERED 6061 ALUMINIUM ALLOY AND ITS COMPOSITES CONTAINING SOFT OR HARD PARTICLES. Journal of Materials Science. . ISSN 0022-2461
|
|
| Relation |
http://ampri.csircentral.net/285/
|
|