Development of Combustion Driven Heating System for Semi-Free Jet Test Rig
IR@NAL: CSIR-National Aerospace Laboratories, Bangalore
View Archive InfoField | Value | |
Title |
Development of Combustion Driven Heating System for Semi-Free Jet Test Rig
|
|
Creator |
Sathiyamoorthy, K
Jayaprakash, C Manjunath, P Srinivas, J Prateesh Kumar, P |
|
Subject |
Aircraft Propulsion and Power
|
|
Description |
National Aerospace Laboratories, CSIR has recently established the Aero-propulsion Mach 3.6 Tunnel for the experimental research on 'High Speed Combustors. It is a blow down type test facility and simulates the scramjet inlet conditions of Mach number and temperature corresponding to the flight Mach number of 6 and altitude of 25 km. The flow conditions obtained at the test section are – Mach number 3.6, total temperature 1700 K, pressure 18 bar, mass flow rates of 25 kg/s with 10 seconds of test duration. The combustion driven heating method with upstream injection of replenishment oxygen has been adapted. The heating system consists of two combustors namely Pre-Heater -01 and Pre-Heater -02. Pre-heater -01 is an aero engine ‘can type’ combustor which heats air from 300 K to 800 K. The liners and fuel injectors from time expired R-11 aero engine were modified to suit to the requirements. Pre-Heater-02 is an ‘afterburner type’ combustion chamber developed for the facility, which heats the air from 800 K to 1700 K. This paper discusses about the development of the pre-heaters and its performances.
|
|
Date |
2013
|
|
Type |
Conference or Workshop Item
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://nal-ir.nal.res.in/11788/1/cp81.pdf
Sathiyamoorthy, K and Jayaprakash, C and Manjunath, P and Srinivas, J and Prateesh Kumar, P (2013) Development of Combustion Driven Heating System for Semi-Free Jet Test Rig. In: National Propulsin Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai. |
|
Relation |
http://nal-ir.nal.res.in/11788/
|
|