Wear study under plastic deformation conditions
IR@IIP: CSIR-Indian Institute of Petroleum, Dehradun
View Archive InfoField | Value | |
Creator |
Shukla, B.M
Singhal, S Singh, D.V |
|
Date |
2009-07-08T09:18:18Z
2009-07-08T09:18:18Z 2009-07-08T09:18:18Z |
|
Identifier |
Wear, 172 (1994) 185-190
http://hdl.handle.net/123456789/293 |
|
Description |
Lubrication in metalworking processes is characterized by plastic deformation conditions resulting in generation
of a large amount of virgin surface and of heat of dcformation. The study of wear undcr these conditions is
important from the point of view of product quality and tool/die wear. A laboratory study of wear under simulated
plastic deformation conditions using pairs of mild steel and EN3l discs on an Amslcr friction and wear testing
machine was carried out. The worn surfaces and wear particles were examined by scanning electron microscopy.
It was observed that wear with a mineral oil 'was greater than that with a vegetable oil. This paper analyses the
phenomenon through an examination of the surfaces and the wear particles.
|
|
Language |
en_US
|
|
Subject |
Tribology
wear |
|
Title |
Wear study under plastic deformation conditions
|
|
Type |
Article
|
|