3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive InfoField | Value | |
Title |
3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide)
based anion exchange membrane for alkaline polymer electrolyte
fuel cells
|
|
Creator |
Hari Gopi, K.
Gouse peera, S. Bhat, S.D. Sridhar, P. Pitchumani, S. |
|
Subject |
Fuel Cells
Electrochemical Power Sources |
|
Description |
Hydroxyl ion (OH–) conducting anion exchange membranes based on modified poly (phenylene
oxide) are fabricated for their application in alkaline polymer electrolyte fuel cells (APEFCs). In the present
study, chloromethylation of poly(phenylene oxide) (PPO) is performed by aryl substitution rather than benzyl
substitution and homogeneously quaternized to form an anion exchange membrane (AEM). 1H NMR and FT–
IR studies reveal successful incorporation of the above groups in the polymer backbone. The membrane is
characterized for its ion exchange capacity and water uptake. The membrane formed by these processes show
good ionic conductivity and when used in fuel cell exhibited an enhanced performance in comparison with the
state-of-the-art commercial AHA membrane. A peak power density of 111 mW/cm2 at a load current density
of 250 mA/cm2 is obtained for PPO based membrane in APEFCs at 30 °C.
|
|
Publisher |
Indian Academy of Sciences.
|
|
Date |
2014
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cecri.csircentral.net/3135/1/049-2014.pdf
Hari Gopi, K. and Gouse peera, S. and Bhat, S.D. and Sridhar, P. and Pitchumani, S. (2014) 3-Methyltrimethylammonium poly(2,6-dimethyl-1,4-phenylene oxide) based anion exchange membrane for alkaline polymer electrolyte fuel cells. Bulletin of Materials Science, 37 (4). pp. 877-881. ISSN 0250-4707 |
|
Relation |
http://cecri.csircentral.net/3135/
|
|