CSIR Central

Consideration of Alternate Raw Materials for Porcelain Tile Manufacture: The Effect of the Incorporation of Fired Scrap and Pyrophyllite

IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata

View Archive Info
 
 
Field Value
 
Title Consideration of Alternate Raw Materials for Porcelain Tile Manufacture: The Effect of the Incorporation of Fired Scrap and Pyrophyllite
 
Creator Mukhopadhyay, Tapas Kumar
Ghosh, S
Majumder, M
Ghatak, Sankar
 
Subject Whiteware
 
Description To address the problem of depleting reserves of raw materials for the manufacture of porcelain tiles a comparative analysis is made between two possible alternatives. The recycling of waste generated during tile manufacturing and the use of pyrophyllite in the composition were compared in relation to process parameters such as firing temperature and manifested properties such as linear shrinkage, porosity, bulk density and the sequence of sintering in a dilatometric study. It was found that the use of pyrophyllite in such systems is a better proposition. The conclusion was supported by microstructural and XRD phase analysis. The better ceramic properties in the pyrophyllite containing system are attributed to higher mullite formation at comparative firing temperature and a possible explanation for the same has been put forward. The use of pyrophyllite will open up an opportunity to utilize this non-conventional material in the commercial production of different porcelain products.
 
Publisher Expert Fachmedien GmbH
 
Date 2015
 
Type Article
PeerReviewed
 
Identifier Mukhopadhyay, Tapas Kumar and Ghosh, S and Majumder, M and Ghatak, Sankar (2015) Consideration of Alternate Raw Materials for Porcelain Tile Manufacture: The Effect of the Incorporation of Fired Scrap and Pyrophyllite. Interceram: International Ceramic Review, 64 (1-2). pp. 20-27. ISSN 0020-5214
 
Relation http://cgcri.csircentral.net/2857/