Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys
IR@NML: CSIR-National Metallurgical Laboratory, Jamshedpur
View Archive Info| Field | Value | |
| Relation |
http://eprints.nmlindia.org/6946/
http://eprints.nmlindia.org/6946 |
|
| Title |
Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys
|
|
| Creator |
Poddar, Palash
Das, Arpan Sahoo, K L |
|
| Subject |
Materials Science
|
|
| Description |
The paper deals with the wear behavior of conventional cast Mg-Sn-based alloys. The alloys were studied through pin-on-disk wear test under four different loading conditions; namely, 9.8, 19.6, 29.4, and 39.2 N. The study highlights the cumulative wear loss, volumetric wear loss, dry sliding wear rate, and coefficient of friction of the alloys. The volumetric wear increased with increasing applied load. The wear mechanism was studied with scanning electron microscope. The wear occurs mainly by plowing mechanism and also by delamination. During wear, extensive plastic deformation and work hardening occurred. Microstructural analysis has been carried out for all the alloys at different loading conditions. (C) The Minerals, Metals & Materials Society and ASM International 2013
|
|
| Publisher |
Springer USA
|
|
| Date |
2014-04
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Language |
en
|
|
| Identifier |
http://eprints.nmlindia.org/6946/1/Poddar-2-2014.pdf
Poddar, Palash and Das, Arpan and Sahoo, K L (2014) Dry Sliding Wear Characteristics of Gravity Die-Cast Magnesium Alloys. Metallurgical and Materials Transactions A, 45A(4). pp. 2270-2283. |
|