Evaluation of silanes as corrosion resistant coatings for Cu-alloy in Sea water
IR@NML: CSIR-National Metallurgical Laboratory, Jamshedpur
View Archive InfoField | Value | |
Title |
Evaluation of silanes as corrosion resistant coatings
for Cu-alloy in Sea water
|
|
Creator |
Kalpana, Y
Sushanta, Roy Alka, |
|
Subject |
Materials Science
Metallurgy |
|
Description |
Three different Silanes were identified which are suitable for coating the copper alloy condenser tubes as Silane-I, Silane-II and Silane-III. These silanes are
dissolved in Isopropanol / Methanol solvent and the PH is suitably adjusted with Glacial
Acetic acid. The silane solutions of specified concentrations are then coated on the
copper alloy samples and then dried. Then the coated samples are evaluated by
electrochemical techniques like Tafel polarisation, Impedance technique etc in Sodium
chloride solution. The corrosion resistances observed in all the cases without and with
Silane coating are reported. Silane II worked more efficiently on all the three alloys. The
impedance values also confirmed this.
|
|
Publisher |
CSIR-National Metallurgical Laboratory
|
|
Date |
2015
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://eprints.nmlindia.org/7398/1/27-32_ISSUE-1.pdf
Kalpana, Y and Sushanta, Roy and Alka, (2015) Evaluation of silanes as corrosion resistant coatings for Cu-alloy in Sea water. Journal of Metallurgy and Materials Science, 57(1) . pp. 27-32. |
|
Relation |
http://eprints.nmlindia.org/7398
http://eprints.nmlindia.org/7398/ |
|