Semisolid Processing of A380 Al Alloy Using Cooling Slope
IR@CMERI: CSIR- Central Mechanical Engineering Research Institute (CMERI), Durgapur
View Archive Info| Field | Value | |
| Title |
Semisolid Processing of A380 Al Alloy Using Cooling Slope
|
|
| Creator |
Das, Prosenjit
Kumar, Manish Samanta, Sudip K. Dutta, Pradip Ghosh, Debashis |
|
| Subject |
Semi solid processing
Al alloys |
|
| Description |
This study is aimed toward obtaining near spherical microstructural features of Rheocast A380 aluminum alloy. Cooling slope (CS) technique has been used to generate semisolid slurry from the superheated alloy melt. Spherodization of primary grains is the heart of semisolid processing which improves mechanical properties significantly in the parts cast from semisolid state compared to the conventional casting processes. Keeping in view of the desired microstructural morphology, i.e., rosette or spherical shape of primary a-Al phase, successive slurry samples have been collected during melt flow and oil quenched to investigate the microstructure evolution mechanism. Conventionally cast A380 Al alloy sample shows dendritic grains surrounded by large eutectic phase whereas finer, near spherical grains have been observed within the cooling slope processed slurry and also in the solidified castings which confirms the effectiveness of semisolid processing of the alloy following cooling slope technique. Grain refiner addition into the alloy melt is found to have favorable effect which leads to the generation of finer primary grains within the slurry with higher degree of sphericity.
|
|
| Publisher |
Taylor & Francis
|
|
| Date |
2014
|
|
| Type |
Article
PeerReviewed |
|
| Identifier |
Das, Prosenjit and Kumar, Manish and Samanta, Sudip K. and Dutta, Pradip and Ghosh, Debashis (2014) Semisolid Processing of A380 Al Alloy Using Cooling Slope. Materials and Manufacturing Processes, 29. pp. 422-428. ISSN 1042-6914
|
|
| Relation |
http://cmeri.csircentral.net/52/
|
|