Mullite Refractories from Clay-Bauxite or Quartz-Bauxite Mixes
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive InfoField | Value | |
Title |
Mullite Refractories from Clay-Bauxite or Quartz-Bauxite Mixes
|
|
Creator |
Chatterjee, N B
Panti, B N |
|
Subject |
Refractories
|
|
Description |
Investigations were undertaken to study the properties of mullite refractories from Katni and Shevroy bauxites with addition of Jabalpur fire-clay or quartz. Mullite was estimated by chemical analysis and confirmed by X-ray and petrographic examination. Refractories hewing 80–90 per cent mullite could be prepared out of these mixes after firing at temperatures 1500°-1600°C. In spite of high mullite content the porosity of these refractories was very high (35–48 per cent) and the refractoriness under load particularly initial softening point (Ta) was rather low (1400°-1600°C). These may be due to incipient growth of mullite crystals and lack of inter-crystalline bond. © 1965, Taylor and Francis Group, LLC
|
|
Publisher |
Indian Ceramic Society
|
|
Date |
1965
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cgcri.csircentral.net/4192/1/chatterjee1965.pdf
Chatterjee, N B and Panti, B N (1965) Mullite Refractories from Clay-Bauxite or Quartz-Bauxite Mixes. Transactions of the Indian Ceramic Society, 24 (1). pp. 116-121. ISSN 0371-750X |
|
Relation |
http://cgcri.csircentral.net/4192/
|
|