Evaluation of flexural modulus of carbon 3D orthogonal woven fabric using a trilinear model
IR@NISCAIR: CSIR-NISCAIR, New Delhi - ONLINE PERIODICALS REPOSITORY (NOPR)
View Archive Info| Field | Value | |
| Title |
Evaluation of flexural modulus of carbon 3D orthogonal woven fabric using a trilinear model
|
|
| Creator |
Minapoor, Shohreh
Ajeli, Saeed Sheikhzadeh, Mohammad |
|
| Subject |
3D Orthogonal weave
Carbon fibres Flexural modulus Non-crimp fabric Three-point bending Trilinear model Woven fabric |
|
| Description |
301-307
Bending behaviour of 3D orthogonal carbon weave composite reinforcement has been investigated. The three-point bending test method has been employed and the load-deflection curves are examined. The influence of carbon fibre tow type, yarn insertion and tension of longitudinal yarns on fibre volume fraction and bending properties of non-crimp 3D orthogonal carbon weave is discussed. It is found that carbon fibre bending properties due to cross-section shape and geometry have a great impact on bending behavior of non-crimp 3D orthogonal carbon weave. Increasing the number of transversal yarns layers and tension of longitudinal yarns increases both fibre volume fraction and bending modulus of non-crimp 3D orthogonal carbon weave. From the bending properties calculated, the factors for improving fibre volume fraction and bending behavior of non-crimp 3D orthogonal carbon weaves are discussed. |
|
| Date |
2018-09-12T10:05:29Z
2018-09-12T10:05:29Z 2018-09 |
|
| Type |
Article
|
|
| Identifier |
0975-1025 (Online); 0971-0426 (Print)
http://nopr.niscair.res.in/handle/123456789/45035 |
|
| Language |
en_US
|
|
| Rights |
<img src='http://nopr.niscair.res.in/image/cc-license-sml.png'> <a href='http://creativecommons.org/licenses/by-nc-nd/2.5/in' target='_blank'>CC Attribution-Noncommercial-No Derivative Works 2.5 India</a>
|
|
| Publisher |
NISCAIR-CSIR, India
|
|
| Source |
IJFTR Vol.43(3) [September 2018]
|
|