CSIR Central

Studies on the development of activated binary clay and corrosion monitoring using embedded sensor

IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi

View Archive Info
 
 
Field Value
 
Title Studies on the development of activated binary clay and corrosion monitoring using embedded sensor
 
Creator Lee, H.
Kwon, S.
Karthick, S.
Saraswathy, V.
Muralidharan, S.
 
Subject Corrosion Science and Engineering
 
Description Bentonite and marconite are the low resistance moisture retaining conductive backfill materials used in earthing applications. Both the products contains some drawbacks: bentonite has limited moisture retaining capacity and marconite has 15–20% impurities which will corrode the earth connections resulting in the loss of the system which are found to be very expensive. Taking into consideration of the above drawbacks, the present study aimed at developing a cost effective and highly conductive backfill material for earthing application with improved performance. For this study, commercially available bentonite and metakaolin (binary) clay was activated through physical, chemical and thermal treatments and the corrosion performance of binary clay was evaluated by using mild steel (MS) and galvanized (GI) steel Among the three activation methods, chemical activation method was found beneficial for mild steel in binary clay media. The conductivity of the chemically activated clay was 204.7 mS/cm, pH was 12.58, and the particle size distribution was found to be 40–50 mm indicates the better corrosion resistance and quite suitable for earthing applications. Chemical activation of the clay mainly involves the breaking of bonds and dissolution of the three-dimensional network structure of glass which in turn cause Na+ ions move closer to the center point of crystal structure and the solubility of SiO2 in clay markedly increases. Potential-time studies showed that galvanizing loses its coating property within ten days in all the three type of clays used. Activation process significantly reduced the corrosion rate (44 and 74 times) in the case of thermally activated (TAC) and chemically activated clay (CAC) respectively
 
Publisher Elsevier
 
Date 2017-07-05
 
Type Article
PeerReviewed
 
Format application/pdf
 
Identifier http://cecri.csircentral.net/3240/1/192-2017.pdf
Lee, H. and Kwon, S. and Karthick, S. and Saraswathy, V. and Muralidharan, S. (2017) Studies on the development of activated binary clay and corrosion monitoring using embedded sensor. Arabian Journal of Chemistry. ISSN 1878-5352
 
Relation http://www.sciencedirect.com
http://cecri.csircentral.net/3240/