Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel
IR@NML: CSIR-National Metallurgical Laboratory, Jamshedpur
View Archive InfoField | Value | |
Title |
Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel
|
|
Creator |
Khajuria, A
Modassir, A Bedi, R Kumar, Rajneesh Ghosh, M Das, C R Albert, S K |
|
Subject |
Steel Metallurgy
|
|
Description |
In the present endeavor, a Gleeble thermo-mechanical simulator has been used to simulate subzones of the heat-affected zone (HAZ) of boron-free P91 and boron-modified P91B steels to investigate the influence of boron on microstructure and mechanical properties. The prior austenite grain (PAG) size remained similar to that of parent metal in the fine-grained heat-affected zone (FGHAZ) and inter-critical heat-affected zone (ICHAZ) of P91B steel. The microhardness value of simulated specimens, including parent metals was observed to be similar. But impression creep resistance of boron-containing steel was significantly higher than that of the boron-free steel. The presence of boron decreased precipitates size and increased fraction of low energy Σ3 coincident-site lattice (CSL) boundaries that attributed to improvement of creep resistance. However, there was a slight reduction in solid solution hardening due to increased area fraction of precipitates in parent metal and simulated specimens of boron-containing steel. Hindering of alloy element partitioning during impression creep of P91B-ICHAZ was observed, which was possibly due to the presence of boron in soluble form in the iron matrix and the segregated form on grain and sub-grain boundaries (SGBs). Further, the addition of boron was observed to retard M23C6 precipitate coarsening in the P91B-ICHAZ in comparison to its P91 version.
|
|
Publisher |
Elsevier
|
|
Date |
2020-12-20
|
|
Type |
Article
PeerReviewed |
|
Relation |
https://doi.org/10.1016/j.ijpvp.2020.104246
http://eprints.nmlindia.org/8251/ |
|
Identifier |
Khajuria, A and Modassir, A and Bedi, R and Kumar, Rajneesh and Ghosh, M and Das, C R and Albert, S K (2020) Influence of boron on microstructure and mechanical properties of Gleeble simulated heat-affected zone in P91 steel. International Journal of Pressure Vessels and Piping, 188 (IF-2.230).
|
|