CSIR Central

An Investigation to Assess the Cause of Accident due to Flyrockin an Opencast Coal Mine: A Case Study

IR@CIMFR: CSIR-Central Institute of Mining and Fuel Research, Dhanbad

View Archive Info
 
 
Field Value
 
Title An Investigation to Assess the Cause of Accident due to Flyrockin an Opencast Coal Mine: A Case Study
 
Creator Sawmliana, C.
Hembram, Panchanan
Singh, Rakesh Kumar
Banerjee, S.
Singh, P. K.
Roy, P. Pal
 
Subject Blasting
 
Description Abstract The paper deals with the investigation carried out to find out the possible reason of the fly rock incident causing fatality of one person at Bhurkunda ‘A´’ Colliery of Central Coalfields Limited (CCL). The flying fragment travelled up to 280 m from the blasting source causing the accidental death. The blasts were conducted in over burden rock strata consisting of medium grained sandstone and shale. The blast hole diameter used in the blast was160 mm, and the average hole depth was 6.0 m. Site mixed emulsion (SME) explosive was used in the blast, and explosive charge per hole was 50.00 kg. Non-electric initiation systems were used for in-hole explosive and surface hole-to-hole initiations. The design parameters used in the blast were thoroughly analyzed using blast simulation software to check any anomaly in the blast design viz. sequence of hole firing, success rate of burden movement, maximum charge per delay fired within 8ms windows, etc. The different fly rock fragments prediction models were used to assess the maximum possible travel distance of the flying in the blast. A synonymous blast was also conducted in the mines to replicate the blast where fly rock accident occurred. All the blasting events were recorded and monitored using a digital video camera. The simulation results of the blast showed the success rate of burden relief more than 80% with sufficient delay intervals for the rock movement during the blast. The maximum possible travel distance of flying fragments based on different fly rock prediction models was 227 m. In the synonymous blast only vertical throws of the flying fragments up to 70 m(approximate) height were observed. It was difficult to find out the exact cause of fly rock incident. However, based on the detailed investigation, it was concluded that the possible cause of flying fragments travelling up to a distance of280 m could be due to the presence of a weak zone in the rock strata
 
Publisher Springer
 
Date 2020-04
 
Type Article
PeerReviewed
 
Identifier Sawmliana, C. and Hembram, Panchanan and Singh, Rakesh Kumar and Banerjee, S. and Singh, P. K. and Roy, P. Pal (2020) An Investigation to Assess the Cause of Accident due to Flyrockin an Opencast Coal Mine: A Case Study. Journal of The Institution of Engineers (India): Series D, 105. pp. 15-26. ISSN 2250-2122
 
Relation http://cimfr.csircentral.net/2292/