Effect of alumina impurity on microstructure and properties of alumina based conventionally brazed joints
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive Info| Field | Value | |
| Title |
Effect of alumina impurity on microstructure and properties of alumina based conventionally brazed joints
|
|
| Creator |
Dandapat, Nandadulal
Ghosh, Sumana |
|
| Subject |
Engineering Materials
|
|
| Description |
Mo-Mn metallization of alumina ceramics of different purity has been performed at 1400 degrees C for 10 min in moist hydrogen and nitrogen atmosphere. Nickel coating has been applied onto the metallized alumina ceramics at 1000 degrees C for 1 h in a reducing hydrogen atmosphere. Finally, metallized and nickel coated alumina ceramics has been brazed with another metallized and nickel coated alumina ceramics using CuAg filler alloy at 900 degrees C for 10 min in a vacuum furnace at 1 x 10(-6) Ton pressure. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis has been carried out for phase analysis, microstructural investigation and elemental composition analysis. The adhesive strength of the metallizing layer and brazing strength of the joint have been measured by pull down breaking strength method. SEM study has shown that the width of the interfacial reaction region between the metallizing layer and substrate enhances with increasing the impurity content in the alumina ceramics. It has been observed that the adhesive strength of the metallizing layer depends on the interfacial reaction layer thickness. The adhesive strength of the metallizing layer has been increased with increasing the thickness of interfacial reaction layer. High adhesive strength of the metallizing layer as well as brazing strength has been achieved for alumina ceramics with high impurity content.
|
|
| Publisher |
National Institute of Science Communication
|
|
| Date |
2020-02
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://cgcri.csircentral.net/4968/1/sumana.pdf
Dandapat, Nandadulal and Ghosh, Sumana (2020) Effect of alumina impurity on microstructure and properties of alumina based conventionally brazed joints. Indian Journal of Engineering and Materials Sciences, 27 (1). pp. 96-103. ISSN 0971-4588 |
|
| Relation |
http://cgcri.csircentral.net/4968/
|
|