Microwave-assisted alumina-zirconia brazed joint for microwave tubes
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive InfoField | Value | |
Title |
Microwave-assisted alumina-zirconia brazed joint for microwave tubes
|
|
Creator |
Shukla, Mayur
Ghosh, Sumana |
|
Subject |
Engineering Materials
|
|
Description |
Alumina-zirconia joint was fabricated by microwave-assisted brazing technique at 980 degrees C for 15 min using TICUSIL (68.8Ag26.7Cu4.5Ti in wt%) as the brazing alloy. The brazed joints were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray analysis, Vickers microhardness evaluation, brazing strength measurement, and helium leak test. X-ray diffraction analysis confirmed the formation of Ti-based compounds at the substrate-filler alloy interfaces of the brazed joints. SEM images showed the substrate-filler alloy interfaces of the brazed joints. The EDX analysis determined the elemental compositions along the joint cross-section. Vickers microhardness measurement indicated reliable joint performance for the microwave-assisted brazed joints during actual application. Brazing strength measurement and helium leak test proved the formation of sound alumina-zirconia brazed joint by both microwave and conventional heating techniques. Scratch tests were performed on the cross-sectional surfaces of the alumina-zirconia joints. Scratch test results established the strong interfacial strength of the microwave brazed joints.
|
|
Publisher |
Australian Ceramic Society
|
|
Date |
2020-09
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cgcri.csircentral.net/5184/1/sumna.pdf
Shukla, Mayur and Ghosh, Sumana (2020) Microwave-assisted alumina-zirconia brazed joint for microwave tubes. Journal of the Australian Ceramic Society, 56 (3). pp. 873-883. ISSN 0004-881X |
|
Relation |
http://cgcri.csircentral.net/5184/
|
|