Determination of trace metals in seawater by ICP-MS after preconcentration and matrix separation by dithiocarbamate complexes
IR@NISCAIR: CSIR-NISCAIR, New Delhi - ONLINE PERIODICALS REPOSITORY (NOPR)
View Archive InfoField | Value | |
Creator |
Satyanarayanan, M
Balaram, V Rao, T Gnaneshwar Dasaram, B Ramesh, S L Mathur, Ramavati Drolia, R K |
|
Date |
2008-02-12T11:29:19Z
2008-02-12T11:29:19Z 2007-03 |
|
Identifier |
0379-5136
http://hdl.handle.net/123456789/17 |
|
Description |
71-75
A rapid single extraction procedure using dithiocarbamate complexing agent in methyl-isobutyl ketone (MIBK) organic phase and acid exchange back-extraction is described for the simultaneous quantitative preconcentration of Fe, Mn, V, Cr, Ni, Co, Cu, Zn, As, Mo, Cd, Pb and U in seawater followed by its determination by inductively coupled plasma mass spectrometry (ICP-MS). This method gives quantitative recoveries for all above metals at pH 4.1-6.4. A matrix matching seawater certified reference material (CRM), NASS-5, was used for calibration so as to minimize the matrix and other associated effects. Blanks and detection limits were in ng/l range. The method gives a recovery of 94-100% for 100 ml sample, facilitating the rapid and interference-free analysis of seawater samples. Excellent agreement was obtained with the certified values of another seawater CRM, CASS-4, when it was analyzed as an unknown. The major advantage of this procedure is that rapid analysis can be performed for a wide range of metals from relatively small samples. |
|
Language |
en_US
|
|
Publisher |
CSIR
|
|
Relation |
Int. Cl8. (2006) B01D 11/04
|
|
Source |
IJMS Vol.36(1) [March 2007]
|
|
Subject |
Trace metals
Seawater Extraction Preconcentration Dithiocarbamate ICP-MS Matrix separation |
|
Title |
Determination of trace metals in seawater by ICP-MS after preconcentration and matrix separation by dithiocarbamate complexes
|
|
Type |
Article
|
|