Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive InfoField | Value | |
Title |
Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC
|
|
Creator |
Ashvini, B.D.
Vinayak, S.K. Vishal, M.D. Vijayamohanan, K.Pillai Manjusha, V.S. |
|
Subject |
Fuel Cells
|
|
Description |
Soft lithography technique is used to micropattern the electrodes on the electrolyte membrane of polymer
electrolyte fuel cell (PEMFC) in order to alleviate the issues due to poor water management and inadequate
reactant distribution in the fuel cell environment. Membrane electrode assembly with the micropatterned
electrode has shown an increase in power density at a higher temperature as well as at a higher relative
humidity when compared to a flat electrode. Consistency in cell performance is observed in the case of
micropatterned electrodes.
|
|
Publisher |
Elsevier B.V
|
|
Date |
2010
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cecri.csircentral.net/38/1/2010-002.pdf
Ashvini, B.D. and Vinayak, S.K. and Vishal, M.D. and Vijayamohanan, K.Pillai and Manjusha, V.S. (2010) Direct transfer of micro-molded electrodes for enhanced mass transport and water management in PEMFC. Electrochemistry Communications, 12. pp. 1638-1641. ISSN 1388-2481 |
|
Relation |
http://www.sciencedirect.com/science/article/pii/S1388248110004091
http://cecri.csircentral.net/38/ |
|