Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials—the influence of bismuth
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive InfoField | Value | |
Title |
Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials—the influence of bismuth
|
|
Creator |
Kumar, M.
Anbukulandainathan, M. Arulraj, I. Chandrasekaran, R. Pattabiraman, R. |
|
Subject |
Electroorganic
Fuel Cells |
|
Description |
Solid oxide fuel cell can convert fuels rich in H2 into electrical energy directly without pollution by electrochemical reaction with oxygen.
The efficiency of energy conversion and durability of performance mainly depend on the oxide ion conducting solid electrolyte activity. The
global experience gained all these years in the solid oxide fuel cell (SOFC) development has prompted for a change from the state of the
art functional electrolyte material, yttria-stabilized zirconia (YSZ), having a conductivity of 0.1 S cm−1 at 1000 ◦C, to a new material which
exhibits equivalent conductivity values in the intermediate temperature range (600–700 ◦C). In this work, yttrium zirconate (Y2Zr2O7 (YZ)),
an ionic conducting stable pyrochlore-based oxide prepared by glycine nitrate combustion route, is systematically characterised. Both circular
and rectangular pellets were fabricated by uniaxial compression followed by annealing at different temperatures. The functional properties
such as porosity, percentage thermal shrinkage in volume and percentage densification of the sintered pellets are compiled. Bismuth oxide is
found to be an effective sintering aid in general. So, the effect of bismuth oxide addition on YZ was investigated through sintering studies,
X-ray diffraction (XRD), TGA/DTA, scanning electron microscopy (SEM) and conductivity measurements. The results obtained on YZ with
and without bismuth oxide addition are discussed with respect to the requirement of an electrolyte for intermediate temperature solid oxide
fuel cell (ITSOFC) application.
|
|
Publisher |
Elsevier
|
|
Date |
2005
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cecri.csircentral.net/133/1/071-2005.pdf
Kumar, M. and Anbukulandainathan, M. and Arulraj, I. and Chandrasekaran, R. and Pattabiraman, R. (2005) Electrical and sintering behaviour of Y2Zr2O7 (YZ) pyrochlore-based materials—the influence of bismuth. Materials Chemistry and Physics, 92 (2). pp. 303-309. |
|
Relation |
http://cecri.csircentral.net/133/
|
|