2',3-Dicarboxylato-4-Hydroxyazobenzene as Corrosion Inhibitor for Aluminium in Sodium Hydroxide
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive InfoField | Value | |
Title |
2',3-Dicarboxylato-4-Hydroxyazobenzene as Corrosion Inhibitor for Aluminium in Sodium Hydroxide
|
|
Creator |
Jeyaraj, T.
Paramasivam, M. Raja, C. Thangappan, V. Stellashalini, A.S. |
|
Subject |
Corrosion Science and Engineering
Electrochemical Materials Science |
|
Description |
A study involving both weight loss and electrochemical techniques has been undertaken to understand the effect of 2‘,3-
dicarboxylato-4-hydroxyazobenzene on the corrosion of Al in NaOH solution. The inhibitive effect increases with the increase in
the concentration of the inhibitor. The maximum inhibition efficiency for the dye was found to be 55.72. The addition of calcium
oxide of concentration, 1.0 x 103 M, increase the above maximum inhibition efficiency to 76.52. The inhibitor appears to operate
through its adsorption over the metal surface and through its ability to slow down the discharge of H+ as H2 gas at the cathodic sites
on the metal surface. There is no definite shift in the open circuit potential, OCP, due to increasing addition of dye without and
with a particular concentration of calcium oxide. The polarisation studies revealed that the corrosion of aluminium in the presence
and the absence of inhibitor was under the anodic control. The corrosion inhibition was found to be of mixed type.
|
|
Publisher |
SAEST
|
|
Date |
2005
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cecri.csircentral.net/218/1/112-2005.pdf
Jeyaraj, T. and Paramasivam, M. and Raja, C. and Thangappan, V. and Stellashalini, A.S. (2005) 2',3-Dicarboxylato-4-Hydroxyazobenzene as Corrosion Inhibitor for Aluminium in Sodium Hydroxide. Transactions of the SAEST, 40 (4). pp. 139-145. |
|
Relation |
http://cecri.csircentral.net/218/
|
|