Characteristics of ZnS films pulse plated using non-aqueous electrolytes
IR@CECRI: CSIR-Central Electrochemical Research Institute, Karaikudi
View Archive Info| Field | Value | |
| Title |
Characteristics of ZnS films pulse plated using non-aqueous
electrolytes
|
|
| Creator |
Murali, K.R.
Kala, S. Elango, P. |
|
| Subject |
Electrochemical Materials Science
|
|
| Description |
Thin films of ZnS were deposited by the pulse
electrodeposition technique employing zinc sulphate and
sodium thiosulphate in diethylene glycol solution at 80�C
and at different duty cycles in the range 6–50%. The films
were polycrystalline exhibiting cubic structure. The intensity
of the peaks increased with duty cycle. Transmission
measurements indicated interference fringes from which
the refractive index fo the films were calculated to be in the
range of 2.30–2.70. The band gap of the films was in
the range of 3.66–3.62 eV with increase of duty cycle. The
films exhibited resistivities in the range of 400–50 ohm cm
with increase of duty cycle. The films exhibited higher
Photoelectrochemical cell output compared to earlier
reports.
|
|
| Publisher |
Springer Science+Business Media, LLC
|
|
| Date |
2010
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://cecri.csircentral.net/446/1/2010-090.pdf
Murali, K.R. and Kala, S. and Elango, P. (2010) Characteristics of ZnS films pulse plated using non-aqueous electrolytes. Journal of Materials Science, 21. pp. 1293-1298. ISSN 0022-2461 |
|
| Relation |
http://cecri.csircentral.net/446/
|
|