CSIR Central

Effect of substitution of fly ash for quartz in triaxial kaolin-quartz-feldspar system

IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata

View Archive Info
 
 
Field Value
 
Title Effect of substitution of fly ash for quartz in triaxial kaolin-quartz-feldspar system
 
Creator Dana, Kausik
Das, S
Das, S K
 
Subject Structural Clay Products
 
Description Quartz was progressively replaced by 5, 10 and 15 wt.% fly ash (a by product of Indian thermal power plant) in a traditional triaxial porcelain composition consisting of kaolinitic clay, quartz and feldspar. The effects of this substitution upon firing at different temperatures (1150-1300 degreesC) were investigated by measuring the linear shrinkage, bulk density, porosity and flexural strength. Quantitative estimation of mullite and residual quartz content was done by XRD and microstructures of some selected samples were studied using SEM. The results show that fly ash containing samples achieved higher densities (max. 2.46 g cm(-3)) in the entire temperature range (1150-1300 degreesC) of firing and matured early than a traditional porcelain composition. The maximum flexural strength (70.5 MPa) was obtained at 1300 degreesC in the 15 wt.% fly ash containing sample compared with (61.1 MPa) obtained in the traditional porcelain sample. XRD studies reveal higher mullitization in fly ash containing samples. SEM photomicrographs of the polished and etched specimens of 1300 degreesC heated samples show the presence of quartz grains and secondary mullite needles embedded in feldspathic glassy matrix. Quartz grains (25-50 mum) are associated with circumferential cracks around them. (C) 2003 Elsevier Ltd. All rights reserved.
 
Publisher Elsevier, European Ceramic Society
 
Date 2004-09
 
Type Article
PeerReviewed
 
Format application/pdf
 
Identifier http://cgcri.csircentral.net/480/1/J_European_Ceram_Soc_24_(2004)_3169%E2%80%933175.pdf
Dana, Kausik and Das, S and Das, S K (2004) Effect of substitution of fly ash for quartz in triaxial kaolin-quartz-feldspar system. Journal of the European Ceramic Society, 24 (10-11). pp. 3169-3175. ISSN 0955-2219
 
Relation http://cgcri.csircentral.net/480/