Laser processing of SiC-particle-reinforced coating on titanium
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive Info| Field | Value | |
| Title |
Laser processing of SiC-particle-reinforced coating on titanium
|
|
| Creator |
Das, Mitun
Balla, Vamsi Krishna Basu, Debabrata Bose, Susmita Bandyopadhyay, Amit |
|
| Subject |
Engineering Materials
|
|
| Description |
Laser engineered net shaping has been used to create a Ti-SiC composite layer on Ti to improve its wear resistance. The influences of laser power and scanning speed on the microstructure and wear resistance of the coatings were examined. Laser parameters were found to have a strong influence on the dissolution of SiC, leading to the formation of Ti(5)Si(3) and TiC with a high amount of SiC on the surface. The composite coatings with hardness between 976 and 1167 HV exhibited average wear rate between 5.91 and 6.60 x 10(-4) mm(3) (N m)(-1). (C) 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
|
|
| Publisher |
PERGAMON-ELSEVIER SCIENCE LTD
|
|
| Date |
2010-08
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://cgcri.csircentral.net/637/1/m_das2'10.pdf
Das, Mitun and Balla, Vamsi Krishna and Basu, Debabrata and Bose, Susmita and Bandyopadhyay, Amit (2010) Laser processing of SiC-particle-reinforced coating on titanium. SCRIPTA MATERIALIA, 63 (4). pp. 438-441. ISSN 1359-6462 |
|
| Relation |
http://cgcri.csircentral.net/637/
|
|