Effect of Substrate and Annealing Temperatures on Mechanical Properties of Ti-rich NiTi Films
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive InfoField | Value | |
Title |
Effect of Substrate and Annealing Temperatures on Mechanical Properties of Ti-rich NiTi Films
|
|
Creator |
Kumar , A
Sharma, S K Bysakh, Sandip Kamat, S V Mohan, S |
|
Subject |
Microstructure and Characterization
|
|
Description |
The effect of substrate and annealing temperatures on mechanical properties of Ti-rich NiTi films deposited on Si (100) substrates by DC magnetron sputtering was studied by nanoindentation. NiTi films were deposited at two substrate temperatures viz. 300 and 400 degrees C. NiTi films deposited at 300 degrees C were annealed for 4 h at four different temperatures, i.e. 300, 400, 500 and 600 degrees C whereas films deposited at 400 degrees C were annealed for 4 h at three different temperatures, i.e. 400, 500 and 600 degrees C. The elastic modulus and hardness of the films were found to be the same in the as-deposited as well as annealed conditions for both substrate temperatures. For a given substrate temperature, the hardness and elastic modulus were found to remain unchanged as long as the films were amorphous. However, both elastic modulus and hardness showed an increase with increasing annealing temperature as the films become crystalline. The results were explained on the basis of the change in microstructure of the film with change in annealing temperature.
|
|
Publisher |
Elsevier
|
|
Date |
2010-11
|
|
Type |
Article
PeerReviewed |
|
Format |
application/pdf
|
|
Identifier |
http://cgcri.csircentral.net/801/1/Bysakh'10.pdf
Kumar , A and Sharma, S K and Bysakh, Sandip and Kamat, S V and Mohan, S (2010) Effect of Substrate and Annealing Temperatures on Mechanical Properties of Ti-rich NiTi Films. Journal of Materials Science & Technology, 26 (11). pp. 961-966. ISSN 1005-0302 |
|
Relation |
http://cgcri.csircentral.net/801/
|
|