Effect of titania on fired characteristics of triaxial porcelain
IR@CGCRI: CSIR-Central Glass and Ceramic Research Institute, Kolkata
View Archive Info| Field | Value | |
| Title |
Effect of titania on fired characteristics of triaxial porcelain
|
|
| Creator |
Bhattacharyya, Sunipa
Das, Swapan Kumar Mitra, Nirendra Krishna |
|
| Subject |
Structural Clay Products
|
|
| Description |
Titania was progressively added in the range 3-9 wt% into a triaxial porcelain body consisting of clay, quartz and feldspar. The composed bodies were heated at five different temperatures in the range 1200-1400 degrees C and their fired properties as well as phases evolved were studied. The results revealed that beyond 1300 degrees C, formation of more liquid phases caused bloating in samples which led to generation of pores. This effect is more pronounced in TiO2 containing samples. In the present system, 1300 degrees C appeared to be the optimum temperature at which porosity was almost negligible and strength was maximum (45 MPa), particularly in presence of TiO2. From the results of XRD studies, it was revealed that quartz,content primarily decreased with increase in TiO2 content due to excess glass formation and its subsequent dissolution. Mullite content increased with increase in TiO2 content. No significant effect was observed beyond 6 wt% addition. Microstructure primarily showed the presence of quartz grain and cluster of smaller sized primary mullite crystals in both the samples without and with TiO2. Very few secondary mullite crystals were also observed. SEM picture of sample containing 9 wt% TiO2 showed some grain boundary crack, due to cooling stress generated in the glassy phase. The drastic reduction of residual strength after 8 cycles of heating at 800 degrees C and cooling particularly in TiO2 containing samples suggests controlled heat treatment of the vitrified samples necessary to promote secondary crystallization process for the enhancement of strength.. Attempts have also been made to correlate the constitutional parameters with the properties.
|
|
| Publisher |
Indian Academy of Science
|
|
| Date |
2005-08
|
|
| Type |
Article
PeerReviewed |
|
| Format |
application/pdf
|
|
| Identifier |
http://cgcri.csircentral.net/764/1/sunipa05.pdf
Bhattacharyya, Sunipa and Das, Swapan Kumar and Mitra, Nirendra Krishna (2005) Effect of titania on fired characteristics of triaxial porcelain. Bulletin of Materials Science, 28 (5). pp. 445-452. ISSN 0250-4707 |
|
| Relation |
http://cgcri.csircentral.net/764/
|
|