CSIR Central

Automation of pilot-scale open raceway pond: A case study of CO2-fed pH control on Spirulina biomass, protein and phycocyanin production.

IR@CFTRI: CSIR-Central Food Technological Research Institute, Mysore

View Archive Info
 
 
Field Value
 
Relation http://ir.cftri.com/14237/
https://doi.org/10.1016/j.jcou.2019.07.006
 
Title Automation of pilot-scale open raceway pond: A case study of CO2-fed pH control on Spirulina biomass, protein and phycocyanin production.
 
Creator Mehr, Jitendra
Ajam, Yakub Shekh
Nethravathy, M. U.
Sarada, R.
Chauhan, V. S.
Sandeep, N. Mudliar
 
Subject 01 Algae
 
Description Spirulina is known to produce high protein and phycocyanin of commercial importance with concomitant CO2 utilisation. The pH is one of the most important factors for cell growth, CO2 utilisation and controlling contamination. In this study, an indigenously developed automated system for Spirulina cultivation was used at pilot scale, where CO2 supply was aimed to provide carbon source and to control culture pH. Among all the studied pH (7.5 ± 0.1,8.5 ± 0.1, 9.5 ± 0.1), pH 8.5 was found to be the best where biomass productivity, CO2 bio-fixation rate, protein and phycocyanin content were noted as 72 mg L−1 d-1, 0.13 g L-1 d-1, 64%, and 14%, respectively. Though the culture at pH 9.5 experienced late CO2 feeding, it was healthy and showed almost similar metabolite content compared to pH 8.5. The pilot scale automation system developed here can be employed to enhance CO2 fed pH control based performance of Spirulina or any microalgae cultivation.
 
Date 2019
 
Type Article
PeerReviewed
 
Format pdf
 
Language en
 
Identifier http://ir.cftri.com/14237/1/Journal%20of%20CO%E2%82%82%20Utilization%2033%20%282019%29%20384%E2%80%93393.pdf
Mehr, Jitendra and Ajam, Yakub Shekh and Nethravathy, M. U. and Sarada, R. and Chauhan, V. S. and Sandeep, N. Mudliar (2019) Automation of pilot-scale open raceway pond: A case study of CO2-fed pH control on Spirulina biomass, protein and phycocyanin production. Journal of CO₂ Utilization, 33. pp. 384-393.